Scheduling Reservations
Polycom®, Inc. 331
5 Click OK.
The dialog box closes and modifications (if any) are saved.
Adjusting the Start Times of all Reservations
When utilizing GMT offset (for example, Daylight Saving Time change), the start time of the reoccurring
reservations scheduled before the Collaboration Server time change are not updated accordingly (although
their start times appear correctly in the Reservations list, when checking the reservation properties the start
time is incorrect).
Following the Collaboration Server time change, the start time of all reoccurring reservations must be
manually adjusted in one operation.
Using this option, the start times of all reservations currently scheduled on the Collaboration Server are
adjusted with the same offset.
To adjust the reoccurring reservations start time after the GMT Offset has been changed
for Daylight Saving Time (DST) or a physical move:.
1 On the Collaboration Server menu, click Setup > RMX Time.
The RMX Time dialog box opens.
Note: Adjustment of Reservation Time
Adjustment of Reservation Time should only be performed after adjustment of Collaboration Server
Time is completed as a separate procedure.
To Next Page
Loading...
