System Configuration Flags
Polycom®, Inc. 811
● If the flag values (i.e. the password lengths) are changed, passwords that were already assigned to
conferences, Reservations, and Meeting Rooms will not change and they can be activated using the
existing passwords. Only new conferencing entities will be affected by the change.
Enabling the Automatic Generation of Passwords
The default password length is defined by the system flag NUMERIC_CONF_PASS_DEFAULT_LEN or by
one of the Automatic Password Generation flags described in the table below.
Do not enable this option in an environment that includes a Polycom DMA system.
Automatic Password Generation Flags
Flag Description
HIDE_CONFERENCE_PASSWORD NO (default) - Conference and chairperson passwords are
displayed when viewing the Conference/Meeting Room/
Reservation properties. It also enables the automatic generation
of passwords in general.
Yes - Conference and Chairperson Passwords are hidden (they
are replaced by asterisks). It also disables the automatic
generation of passwords.
NUMERIC_CONF_PASS_MIN_LEN Enter the minimum number of characters required for conference
passwords.
Possible values: 0 – 16.
0 (default in non-secured mode) means no minimum length.
However this setting cannot be applied when the Collaboration
Server is in Ultra Secure Mode.
9 (default in Ultra Secure Mode) Conference password must be
at least 9 characters in length.
NUMERIC_CHAIR_PASS_MIN_LEN Enter the minimum number of characters required for chairperson
passwords.
default: 0.
NUMERIC_CONF_PASS_MAX_LEN Enter the maximum number of characters permitted for
conference passwords.
Possible values: 0 – 16
Default: 16
NUMERIC_CHAIR_PASS_MAX_LEN Enter the maximum number of characters permitted for
chairperson passwords.
Possible values: 0 – 16
16 (default) - chairperson password maximum length is 16
characters.
To Next Page
Loading...
