Polycom realpresence 1800 - Modifying an ISDN;PSTN Network Service

Defining ISDN/PSTN Network Services
Polycom®, Inc. 542
17 Attach spans to existing Network Services, by marking the appropriate check boxes in the Attached
field.
Each ISDN/PSTN card can support 7 E1 or 9 T1 PRI lines.
18 Click Save & Close.
Modifying an ISDN/PSTN Network Service
To Modify an ISDN/PSTN Network Service:
1 In the RMX Management pane, click ISDN/PSTN Network Services ().
2 In the ISDN/PSTN Network Services list, double-click the ISDN or right-click the ISDN entry and
select Properties.
The ISDN Properties dialog boxes are displayed. They are similar to the Fast Configuration
Wizard’s dialog boxes. For more information see Adding/Modifying ISDN/PSTN Network Services.
The following ISDN Properties can be modified:
 PRI Settings
 Net Specific
 Dial-out Prefix
 Span Definition
 Framing
 Side
 Line Coding
 Switch Type
 Phones