Conference and Participant Level Operations
Polycom, Inc. 400
Video Forcing
This function is not available to chairpersons using PCM with ISDN endpoints.
Video Forcing enables the chairperson to force the video of a specific participant to a specific window of the
video layout.
To Video Force a participant’s video:
1 Use the Up/Down arrow keys to select Video Force in the Main Menu and then press the Right
arrow or # key to confirm your selection.
or
Press the 5 key on the Remote Device.
The Video Force sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the window of the video layout that you want the
specific participant to be displayed in.
3 Press the Zoom In key to cycle the display of all participants in the selected video window until the
participant you want to be displayed appears.
4 Press the Right arrow or # key to confirm your selection.
Recording
This function is not available to chairpersons using PCM with ISDN endpoints.
If a Recording Link has been set up in the Conference Profile, the conference chairperson can use the PCM
interface to start, pause, resume and stop recording. If no Recording Link exists, this function appears
grayed out and cannot be selected.
To Next Page
Loading...
