Conference and Participant Monitoring
Polycom®, Inc. 420
Additional information about the conference can be viewed when accessing the conference properties.
Viewing the Properties of CP and Mixed CP and SVC Conferences
To view the parameters of an ongoing CP conference:
1 In the Conference list pane, double-click the conference, or right-click the conference and then click
Conference Properties.
SIP Registration The status of registration with the SIP server:
• Not configured - Registration with the SIP Server was not enabled in the
Conference Profile assigned to this conferencing Entity.
In Multiple Networks configuration, If one service is not configured while others are
configured and registered, the status reflects the registration with the configured
Network Services. The registration status with each SIP Server can be viewed in
the Properties - Network Services dialog box of each conferencing entity.
•Failed - Registration with the SIP Server failed. This may be due to incorrect
definition of the SIP server in the IP Network Service, or the SIP server may be
down, or any other reason the affects the connection between the MCU or the SIP
Server to the network.
•Registered - The conferencing entity is registered with the SIP Server.
• Partially Registered - This status is available only in Multiple Networks
configuration, when the conferencing entity failed to register to all the required
Network Services if more than one Network Service was selected.
Conferences – Monitoring Information (Continued)
Field Description
To Next Page
Loading...
