Polycom realpresence 1800 - Configuring and Modifying Precedence Domains and DSCP Values

Ultra Secure Mode
Polycom, Inc. 865
Configuring and Modifying Precedence Domains and DSCP Values
The Precedence Domains and DSCP values for each Precedence Domain can be configured and modified
per MCU.
To configure Precedence Settings:
1 On the RMX menu, click Setup > Precedence Settings
The Precedence Settings dialog box is displayed.
2 Optional: Modify the values if required.
Precedence Settings - Domains, Levels and DSCP Values
Field Description
Use Precedence Select or clear the check box to enable or disable Precedence.
Default: Cleared (Precedence disabled)
Precedence Domain Select the Precedence Domain to be modified, 1 or 2, from the drop-down
menu.
Possible Values: 1 / 2
Domain Name Enter the required Domain Name.
Signaling DSCP Modify the DSCP value of the Signaling DSCP. A single Signaling Proxy is used
for all Precedence Levels.
Default: 40
Range: 0 - 63