Conference and Participant Level Operations
Polycom, Inc. 395
DTMF Codes - Numeric Keys
DTMF codes are entered using the Remote Device Numerics Keys and are defined as follows:
PCM Main Menu - Level 1
Click & View
With the Click&View application, participants can change their Personal Layouts using the Arrow Keys or
DTMF codes entered using the Numeric Keys of their endpoints.
For a full description of Click&View see Defining a New Conference IVR Service.
Zoom out (-) • Exit PCM Menu.
• Zoom out on the remote camera when using FECC.
Before using the shortcut number keys 0-9, enable the DTMF function of the endpoint according to
that endpoint’s configurations.
PCM - DTMF Codes
Numeric Key Description
0
• Number input.
• Shortcut key to a numbered menu option - when conference video or the PCM menu is
displayed.
1-9
• Number input.
• Shortcut key to a numbered menu option - when the conference video or the PCM menu is
displayed.
• Initiate PCM session on ISDN/PSTN endpoint (1 is the default for the Start PCM DTMF Code).
*
• Initiate DTMF mode (with Polycom endpoints) - during a conference or when the PCM menu is
displayed.
• Enter a period “.” - while entering an IP address.
# Confirm selection and send information to the RMX.
PCM - Menu Navigation (continued)
Arrow Key Description
To Next Page
Loading...
