Polycom realpresence 1800 - Defining AVC-Based Conference Profiles

Polycom®, Inc. 38
Defining AVC-Based Conference Profiles
AVC-based Conference Profile options differ according to the selected Conferencing Mode CP and VSW.
To facilitate the definition process of a new Profile, the system displays default values for each parameter
so you need only to modify the required settings.
Defining AVC CP Conferencing Profiles
When defining a new Profile, you select the parameters that determine the video display on the participant’s
endpoint, the quality of the video, content sharing parameters, whether the conference will be recorded,
encryption, Telepresence mode and other conferencing parameters.
The following parameters are defined:
● New AVC CP Profile - General Parameters
● New AVC CP Profile - Advanced Parameters
● New AVC CP Profile - Gathering Settings Parameters
● New AVC CP Profile - Video Quality Parameters
● New AVC CP Profile - Video Settings Parameters
● New AVC CP Profile - Audio Settings Parameters
● New AVC CP Profile - IVR Parameters
● New AVC CP Profile - Recording Parameters
● New AVC CP Profile - Site Names Parameters
● New AVC CP Profile - Message Overlay Parameters
● New AVC CP Profile - Network Services Parameters
● New AVC CP Profile - Layout Indications Parameters
To define a new CP Profile:
1 In the RMX Management pane, click Conference Profiles.