Ultra Secure Mode
Polycom, Inc. 866
3 Click OK.
System Flags
The following System Flags must be added to system.cfg if their values are to be modified:
● QOS_MANAGEMENT_NETWORK - the overall hex value of the DiffServ field (not just the value of
the DSCP portion) is used as the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0xFC
● REJECT_INCORRECT_PRECEDENCE_DOMAIN_NAME - see Dial-in calls (above) for a
description of this flag.
Default: NO
Range: YES / NO
Monitoring Precedence Level
The Precedence Level of each connected participant is listed in the Participants list pane.
Level r-priority, Audio DSCP and Video DSCP values can be modified for each of the
six Precedence Levels:
• ROUTINE
• PRIORITY
• IMMEDIATE
• FLASH
• FLASH-OVERRIDE
• FLASH-OVERRIDE+
r-priority Modify the r-priority value for the Level.
Range: 0 - 255.
Default: ROUTINE - 0, PRIORITY - 2, IMMEDIATE - 4, FLASH - 6,
FLASH-OVERRIDE - 8, FLASH-OVERRIDE+ - 9
Audio/Video DSCP Modify the DSCP value for the Audio/Video DSCP.
Range: 0 - 63.
Default: ROUTINE - 51, PRIORITY - 39, IMMEDIATE - 37, FLASH - 35,
FLASH-OVERRIDE - 33, FLASH-OVERRIDE+ - 31
Precedence Settings - Domains, Levels and DSCP Values
Field Description
To Next Page
Loading...
