System Configuration Flags
Polycom®, Inc. 807
Special System Flags
Auto Layout Configuration Flags
The Auto Layout option lets the Collaboration Server automatically select the conference video layout based
on the number of participants currently connected to the conference. You can modify the default selection
of the conference video layout to customize it to your conferencing preferences.
The default Auto Layout is controlled by 21 flags:
PREDEFINED_AUTO_LAYOUT_0, ... , PREDEFINED_AUTO_LAYOUT_20
Each of the 21 Auto Layout flags can be left at its default value, or set to any of the possible values listed in
the following Default Auto Layouts table.
The flag that controls the Auto Layout you wish to modify must be manually added to the System
Configuration file.
The table below lists the available layouts, and indicates those used as defaults for each number of
participants. These defaults are the values of the system flags PREDEFINED_AUTO_LAYOUT_<n>.
Available Layouts
No. of
Participants
Auto Layout Flag Layout Default Value
0 PREDEFINED_AUTO_LAYOUT_0
CP_LAYOUT_1X11 PREDEFINED_AUTO_LAYOUT_1
2 PREDEFINED_AUTO_LAYOUT_2
3 PREDEFINED_AUTO_LAYOUT_3 CP_LAYOUT_1x2VER
4 PREDEFINED_AUTO_LAYOUT_4
CP_LAYOUT_2X2
5 PREDEFINED_AUTO_LAYOUT_5
6 PREDEFINED_AUTO_LAYOUT_6
CP_LAYOUT_1P5
7 PREDEFINED_AUTO_LAYOUT_7
8 PREDEFINED_AUTO_LAYOUT_8
CP_LAYOUT_1P7
9 PREDEFINED_AUTO_LAYOUT_9
10 PREDEFINED_AUTO_LAYOUT_10
CP_LAYOUT_2P8
11 PREDEFINED_AUTO_LAYOUT_11
To Next Page
Loading...
