Appendix H - Deployment Into Microsoft Environments
Polycom®, Inc. 1002
Content Sharing Behavior by Lync Connection and MCU Type
Connection Type
Content Sharing Behavior
Polycom® ContentConnect™
Plug in
Polycom® ContentConnect™
Gateway
Point to point: Lync client to
Lync client.
Microsoft Content is used for the entire session.
Lync calls VMR directly Polycom Content is used for the
entire session.
Not supported.
Lync calls Lync 2013 AVMCU
conference with no
Collaboration Server cascade
participant.
Microsoft content is used until
Collaboration Server will joins, from
which time it will switch to Polycom
content
Microsoft Native RDP Content is used.
Collaboration Server joins a
Lync 2013 AVMCU conference
before Content sharing is
initiated.
Polycom Content is used until
Collaboration Server leaves the
conference.
Collaboration Server joins a
Lync 2013 AVMCU conference
while Content is being shared.
When the Polycom®
ContentConnect™ plug in of the
Content speaker detects that
Microsoft Content is being sent by the
Lync client, it automatically stops the
Microsoft Content and switches to
Polycom Content and starts sending
Polycom Content.
Polycom Content is used until the
Collaboration Server leaves the Lync
2013 AVMCU conference.
Polycom® ContentConnect™ Behavior by Lync Content Type
Lync Content Type
Polycom® ContentConnect™ Behavior
Polycom® ContentConnect™
Plug in
Polycom® ContentConnect™
Gateway
Desktop Sharing Send the desktop In cases where there is more than one monitor, the Lync client
asks which monitor to use and the Polycom® ContentConnect™ will comply.
Program Sharing Only the application is sent.
To Next Page
Loading...
