Setting Conferences for Telepresence Mode (AVC CP)
Polycom®, Inc. 175
6 In the Telepresence Layout Mode field, select the Telepresence Layout Mode to be used in the
conference. This field is used by VNOC operators and Polycom Multi Layout Applications to retrieve
Telepresence Layout Mode information from the Collaboration Server.
The following modes can be selected (as required by the VNOC and Polycom Multi Layout
Applications):
Manual
Continuous presence - Room Continuous Presence (Default)
Room Switch - Voice Activated Room Switching
7 Select the required video layout.
8 Click OK.
• When Telepresence Mode is enabled, the Skins options are disabled as the system uses a black
background and the frames and speaker indication are disabled.
It is recommended that the PRESERVE_PARTY_CELL_ON_FORCE_LAYOUT System Flag be set
to YES if the Collaboration Server is used primarily for ITP conferences with MLA.
• For more information see the flag description in System Configuration Flags.
To Next Page
Loading...
