Setting Conferences for Telepresence Mode (AVC CP)
Polycom®, Inc. 180
● Directional media flows, A B, are shown separately for readability purposes.
RMX Telepresence Layout Mode - Room Switch
In the RMX Telepresence Layout Mode - Continuous Presence figure:
An HDX endpoint and an OTX Room System connects to RMX A.
An HDX endpoint and an RPX Room System connects to RMX B.
This layout requires that the Telepresence Layout Mode to be set to Continuous Presence in the
Conference Profiles of the Cascading Conferences in each RMX.
The current speaker is the HDX endpoint connected to RMX A.
To Next Page
Loading...
