Defining Cascading Conferences
Polycom®, Inc. 242
2 In the Participants pane, click New Participant ().
The New Participant - General dialog box is displayed.
3 Define the following parameters:
New Participant – Dial-out Cascade Link
Field Description
Name Enter the participant’s name.
This field may not be left blank. Duplicate participant names, comma, and
semi-colon characters may not be used in this field.
Dialing Direction Select Dial-out.
Type Select H.323.
IP Address Enter the IP address of the Signaling Host of the MCU running the other (second)
conference, where the cascade enabled Entry Queue is defined.
To Next Page
Loading...
