Defining Cascading Conferences
Polycom®, Inc. 244
5 In the Cascade field, select:
Slave (if the participant is defined in a conference running on a Slave MCU).
Master
(if the participant is defined in a conference running on the Master MCU)
.
6 Click OK.
To define a Dial-in Participant as the cascade link:
1 In the Participants list, click the New Participant button( ).
The New Participant - General dialog box opens.
2 Define the following parameters:
New Participant – Dial-in Cascade Link
Field Description
Display Name Enter the participant’s name.
This field may not be left blank. Duplicate participant names, comma, and
semi-colon characters may not be used in this field.
Dialing Direction Select Dial-in.
Type Select H.323.
To Next Page
Loading...
