IP Network Services
Polycom, Inc. 526
The following cables are connected to the LAN ports on the rear panel of the RealPresence Collaboration
Server 1800:
Media Redundancy on the RealPresence Collaboration Server (RMX) 1800 is dependent on the settings of
the LAN_REDUNDANCY and MULTIPLE_SERVICES System Flags as summarized in the following table:
LAN Connections to the IP ports
IP Port Description
LAN 1 For management network connections:
When LAN redundancy is enabled, LAN 1 is used for management, media, and
signaling network connections.
LAN 2 For media, and signaling network connections:
When LAN redundancy is enabled, LAN 2 is the backup for the LAN 1 port.
RMX 1800 - Media Redundancy - System Flags
System Flag / Value RMX 1800
LAN_REDUNDANCY = NO
MULTIPLE_SERVICES = NO
No Redundancy.
If a second LAN cable is connected to Port 2, Network separation is
enabled (the Management Network Service is separated from the Default
IP Network Service)
LAN_REDUNDANCY = NO
MULTIPLE_SERVICES = YES
No Redundancy.
LAN_REDUNDANCY = YES
MULTIPLE_SERVICES = NO
Full Redundancy
LAN_REDUNDANCY = YES
MULTIPLE_SERVICES = YES
These flags cannot be set to YES simultaneously.
To Next Page
Loading...
