System Configuration Flags
Polycom®, Inc. 774
FORCE_RESOLUTION Use this flag to specify IP (H.323 and SIP) endpoint types that
cannot receive wide screen resolution and that were not
automatically identified as such by the Collaboration Server.
Possible values are endpoint types, each type followed by a
semicolon. For example, when disabling Wide screen resolution in
an HDX endpoint enter the following string: HDX;
Note: Use this flag when the flag SEND_WIDE_RES_TO_IP is set
to YES.
FORCE_STATIC_MB_ENCODING This flag supports Tandberg MXP mode of sending and receiving
video by IP endpoint in HD 720p resolution and Video Quality set
to Motion. This mode is not supported for ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
FORCE_STRONG_PASSWORD_P
OLICY
When set to YES, implements the Strong Password rules. For
more details, Changing a User’s Password.
Default: NO
(default when ULTRA_SECURE_MODE=YES),
FORCE_SYSTEM_BROADCAST_V
OLUME
If set to YES, the level of broadcasting volume of the connected
participant is value taken from the system flag
SYSTEM_BROADCAST_VOLUME.
If set to NO (default), the broadcasting volume level is 5.
FORCE_SYSTEM_LISTENING_VO
LUME
If set to YES, the level of listening volume of the connected
participant is value taken from the system flag
SYSTEM_LISTENING_VOLUME.
If set to NO (default), the listening volume level is 5.
G728_IP Enables or disables declaration of G.728 Audio Algorithm
capabilities in IP calls.
Range: YES / NO
Default: NO
G728_ISDN Enables or disables declaration of G.728 Audio Algorithm
capabilities in ISDN calls.
Range: YES / NO
Default: NO
GK_MANDATORY_FOR_CALLS_IN If set to YES, a gatekeeper is required to receive incoming H.323
calls. If a gatekeeper is not configure in the Collaboration Server,
the calls will fail.
If set to NO (default), gatekeeper is not required to process H.323
incoming calls and H.323 participants can dial in with or without a
gatekeeper.
The MCMS System Flags
Flag Description Add?
To Next Page
Loading...
