EasyManua.ls Logo

Polycom realpresence 1800 - Page 807

Polycom realpresence 1800
1113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Configuration Flags
Polycom®, Inc. 776
HD_THRESHOLD_BITRATE Sets the minimum bit rate required by endpoints to connect to an
HD Conference. Endpoints that cannot support this bit rate are
connected as audio only.
Range: 384kbps - 4Mbs (Default: 768)
HIDE_CONFERENCE_PASSWORD If set to YES (default in Ultra Secure Mode):
Conference and Chairperson Passwords that are displayed in
the Collaboration Server Web Client or RMX Manager are
hidden when viewing the properties of the conference.
Automatic generation of passwords (both conference and
chairperson passwords) is disabled, regardless of the settings
of the flags:
NUMERIC_CONF_PASS_DEFAULT _LEN
NUMERIC_CHAIR_PASS_ DEFAULT_LEN.
For more information see Automatic Password Generation Flags.
Default: NO.
HW_FOLLOW_SPEAKER_RESOL
UTION_ON_1X1_LAYOUT
Enables endpoints capable of higher resolution In a conference
where some endpoints are lower than 4CIF and others are higher
to receive the Indication icons.
Range:
•AUTO (default) - When any of the Indication Icons are
configured for display, do not follow the speaker. When the
Indication Icons are not configured for display, follow the
speaker.
YES - Always follow the speaker in 1x1 layout.
•NO - Never follow the speaker in 1x1 layout.
IGNORE_AIM Audio Indicate Muted (AIM) is Relevant to H.323 endpoints. When
an endpoint mutes its microphone, it does not necessarily mute its
entire audio stream. This allows sharing of Content that includes
audio while microphones are muted.
When set to:
NO - When the AIM signal is received, the participant is muted and
a mute icon is displayed in the RMX Web Client / RMX Manager.
YES - When the AIM signal is received, the participant is not
muted and a mute icon is not displayed in the RMX Web Client /
RMX Manager.
Range: YES, NO
Default: NO
INTERNAL_SCHEDULER When set to NO (default) this flag prevents potential scheduling
conflicts from occurring as a result of system calls from external
scheduling applications such as Polycom ReadiManager®, and
others via the API.
Set to YES to schedule conference reservations using an external
scheduling application.
The MCMS System Flags
Flag Description Add?

Table of Contents

Other manuals for Polycom realpresence 1800

Related product manuals