System Configuration Flags
Polycom®, Inc. 801
SIP_TCP_PORT_ADDR_STRATEG
Y
Setting the flag to 1 prevents the use of two sockets for one SIP
call - one for inbound traffic, one for outbound traffic. This is done
by inserting port 5060/5061 into the Route[0] header.
Possible values:
• 0 - Inbound traffic on port 5060/5061 outbound traffic on port
60000
• 1 - Both inbound and outbound traffic on port 5060/5061
Default: 0
SNMP_FIPS_MODE Controls availability of DES and MD5 Authentication Methods.
Range:
• YES - DES and MD5 are not available for selection in the user
interface.
• NO - DES and MD5 are available for selection in the user
interface.
Default:
• Standard Security Mode - NO
• Ultra Secure Mode - YES
STAR_DELIMITER_ALLOWED When set to YES, an asterisk “*” can be used as a delimiter in
Conference and Meeting Room dial strings.
The dial string is first searched for “'#' first followed by “*”.
Default: NO
SUPPORT_HIGH _PROFILE Enables or disables the support of High Profile video protocol in
CP conferences. This flag is specific to CP conferences and has
no effect on VSW conferences.
Range: YES / NO
Default: YES
SUPPORT_HIGH_PROFILE_WITH
_ISDN
Enables or disables the support of High Profile video protocol for
ISDN participants in CP conferences. This flag is specific to CP
conferences and has no effect on VSW conferences.
Range: YES / NO
Default: NO
SUPPORT_MULTIPLE_ICE_USER
S
Enables the configuration of multiple Lync registrations.
The MCMS System Flags
Flag Description Add?
To Next Page
Loading...
