Ultra Secure Mode
Polycom, Inc. 838
e Click OK.
f In the MCUs list, select the RMX to be updated.
g Right-click in the MCUs list entry and select Connect.
h Click Accept to accept the warning banner.
i Enter an administrator Username and Password.
j Click OK.
Step 3: Open the Certification Repository and Update the CRL files
a On the RMX menu, click Setup > RMX Secured Communication > Certification Repository.
b Click the CRL tab.
c Click Add.
d In the Install File dialog box, select the DER or PEM format depending on which file format was
chosen in Step 1 of this procedure.
e Click the Browse button to navigate to the folder on the workstation where you saved the CRL
files in Step 1 of this procedure.
f Select the CRL file that you want to upload.
To Next Page
Loading...
