Polycom
®
SoundStation
®
IP 5000 Phone User Guide
36
— Press the Log in soft key.
or
— Press , and then select Features > User Login > Log in.
2. From the User Login screen, enter your user ID and password, and then
press the Log in soft key.
If you don’t know what your user ID and password are, ask your
administrator. Default passwords are preset at the factory to the numerals
123. How ever, you r ad m inistrator may have ch an ged this for secu rity
reasons.
If your login credentials are accepted, the phone updates to display your
personal phone p rofile, and the id le screen is d isp layed.
If your credentials are not accepted, the message User login failed is
displayed, and the User Login screen displays again. If you need to
confirm your credentials, ask your system administrator.
To log out of a phone:
1. From the idle screen, do one of the following:
— Press the Log out soft key.
or
— Press , and then select Features > User Login > Log out.
2. To confirm, press the Yes soft key.
Your personal profile is no longer accessible, and the phone displays
either the User Login screen for the next user login, or the default phone
profile for anonymous users.
Placing Calls from Phones that are in the Logged Out State
If a phone doesn’t require a user login, you can use the phone to place calls to
any number, even though the phone may be in the logged out state.
If a phone requires a user login, you can place calls to authorized numbers
when the phone is in the logged out state. These numbers are set up by your
administrator. You w on’t be able to call any other numbers until you log in to
the phone.
To place a call to an authorized number from a phone in the logged out state:
1. Press the New Call soft key.
2. From the Place an Authorized Call screen, select the number you want to
call, and then press the Dial soft key.
The call is placed.
To Next Page
Loading...
Need help?
General