Polyend Play - Page 101

101
Polyend Play Manual Rev 1
NOTES
Sequencing Patterns
6
▌ PLAYING THE VIEW MODE KEYBOARD
1. Press [View] to select the view keyboard mode.
2. The four right side pad columns will revert to the view keyboard
controller. The pads will illuminate yellow. The upper green row controls
the keyboard octave transposition.
3. To assign a note when step sequencing:-
• Ensure the work step is set correctly. For example a melodic sample
i.e. piano is selected.
• Press and hold the step to assign a note value.
• While holding the step pad, press a note in the view mode
keyboard. This will assign the last selected note to the step.
• Repeat the process to build melodies across a track step pattern.
4. To assign a note when live recording:-
• Ensure the work step is set correctly. For example a melodic sample
i.e. piano is selected.
• Select [Live Rec] mode and Press [Play].
• Play the view mode keyboard. This will assign the notes being
played into the sequence steps in real-time.
• Patterns can be edited later, for example in step sequencing mode.
5. An external MIDI controller can be connected to perform the same
functions as the view controller.
▌ CHANGING VIEW MODE LAYOUT
1. Press (Screen) to select the main menu.
2. Turn (Screen) to scroll and highlight the sub menu options. Highlight
‘Settings’. Press (Screen) to select this sub menu.
3. Turn (Screen) to scroll and highlight the options. Highlight ‘View Layout.
Press (Screen) to select this option.
4. Turn (Screen) to scroll and highlight the options. Highlight either ‘Piano
Notes’ or ‘Grid Notes’. Press (Screen) to select the highlighted option.