Precor Experience Series 800 line EFX User Manual

cification.
Note:Make sure to install the Yoke Assy with the ramp fastener threads on the
bottom (closest to the Lift Motor).
5. Prepare the Lift Motor for installation by sliding the clevis pin through the Yoke
Assembly mounting bracket right side until flush with the left inside of the lift motor
mounting bracket. Then install lift motor assembly so that the clevis pin rests in the weld-
ment frame mounting bracket notch. While installing carefully guide the Yoke into mount-
ing position under the ramp and that the top of the jackscrew clears any obstructions.
Continue to slide the clevis pin through the weldment frame bracket and secure with the
hitch pin.
Experience Series 800 Line EFX
103
5 Replacement Procedures
Lift Motor Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English