Preen AFV+ Series - Page 8

1-2
3.5 Setting Page 3-41
3.5.1 TEST Subpage 3-41
3.5.2 SYSTEM Page 3-50
3.6 PGM Page 3-58
3.6.1 RAMP Setting 3-59
3.6.2 STEP Setting 3-62
3.7 Communication Page 3-65
3.7.1 RS-485 Setting Page 3-66
3.7.2 RS-232 / GPIB Setting Page 3-67
3.7.3 RS-422 Setting Page 3-68
3.7.4 Ethernet Setting Page (Optional) 3-69
3.8 Meter Page 3-72
3.9 Event Page 3-75
3.10 Product Information 3-76
3.11 Error Log 3-77
4 Preen Program 4-80
4.1 Introduction 4-80
4.2 Control Software: GENERAL Mode 4-83
4.3 Control Software: STEP Mode 4-85
4.4 Control software: RAMP mode 4-87
5 MODBUS RTU Command Format 5-89
5.1 Write Register Command Format 5-89
5.1.1 Write Single Register Command Format 5-89
5.1.2 Write Single Register Correct Answer Format 5-89
5.1.3 Write Multiple Registers Command Format 5-90
5.1.4 Write Multiple Registers Correct Answer Format 5-90
5.2 Read Register Command Format 5-91
5.2.1 Read Register Command Format 5-91