1-3
5.2.2 Read Register Successfully Answer Format 5-91
5.2.3 Communication Fail Answer Format 5-92
5.3 Register Address Table 5-93
5.3.1 Write Register Addresses 5-93
5.3.2 Read Registere Addresses 5-95
5.4 CRC Checksum Calculation 5-97
5.5 Communication Example 5-100
5.5.1 Switch Remote/Local 5-100
5.5.2 Switch High/Low Level 5-100
5.5.3 Read Equipment Information 5-100
5.5.4 General Mode 5-100
5.5.5 Step Mode 5-101
5.5.6 Gradual Mode 5-101
5.5.7 Output Status 5-101
5.5.8 Stop 5-101
5.5.9 Reset 5-101
5.5.10 Limit Current Setting 5-102
5.5.11 Phase Angle Control Setting (Optional) 5-102
5.6 System Error Code Description 5-102
5.6.1 System Error Code 5-102
6 SCPI Command 6-104
6.1 *RST 6-104
6.2 SYST Command 6-104
6.2.1 SYST:REMote 6-104
6.2.2 SYST:LOCal 6-104
6.2.3 SYST:ERRor? 6-104
6.2.4 SYST:INFO? 6-104
6.2.5 SYST:FUNC? 6-105
6.3 Three-Phase SOUR Command 6-105
6.3.1 SOUR:VOLT:RANGe 6-105