Value range: I0 to I90 when [Resident] is
set; or C1 to C4 when [Resident2] is set
Sets the PCL font width.
Value range: 0.44 to 99.99 CPI (in
increments of 0.01 CPI)
Sets the PCL font height.
Value range: 4.00 to 999.75 points (in
increments of 0.25 points)
Selects the symbol set of PCL.
Sets the number of columns until an auto
carriage return on A4 paper.
Selects whether or not to print blank pages.
Sets the operation of this machine when
receiving a CR code.
Sets the operation of this machine when
receiving an LF code.
Sets the unprintable area of the paper.
Sets whether to use composite black
(CMYK mixed color) or pure black (K only)
for the black color (100%) of image data.
Sets whether to emphasize fine lines and
make them thicker.
Sets the value to specify the tray with the
output specification command of PCL.
Value range: 1 - 59
Sets up Pn specified in MANUAL by
MANUAL-1 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
Sets up Pn specified in MANUAL by
MANUAL-2 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
Sets up Pn specified TRAYO (MP Tray) by
MP Tray ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Sets up Pn specified TRAY 1 by Tray 1 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).
Sets up Pn specified TRAY 2 by Tray 2 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).
Sets up Pn specified TRAY 3 by Tray 3 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).
Sets up Pn specified TRAY 4 by Tray 4 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).
Specifies character pitches in IBM PPR
emulation.
Specifies 12CPI pitches for Condense
Mode.