Printronix LP654C - Page 123

- 124 -
Item
Factory
default
settings
Description
Character Set
SET-2
Specifies a character set.
Symbol Set
IBM-437
Specifies a symbol set.
Letter O Style
Disable
Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Zero Character
Normal
Sets the zero to be slashed or unslashed.
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
Off
Selects whether to print blank pages.
CR Function
CR
Selects a carriage return from [CR] or
[CR+LF].
LF Function
LF
Selects a line feed from [LF] or [LF+CR].
Line Length
80 Column
Specifies the number of characters per line.
Form Length
11.7 inch or
11 inch
*1
Specifies the length of paper.
TOF Position
0.0 inch
Specifies the distance from the top edge of
paper.
Left Margin
0.0 inch
Specifies the distance from the left edge of
paper so that the print starting point shifts to
the right horizontally.
Fit to Letter
Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
(66 lines).
Text Height
Same
Sets the height of a character.
Same: The height stays the same
regardless of CPI.
Diff: The height varies according to CPI.
EPSON FX
Setup
Character Pitch
10 CPI
Specifies character pitch.
Character Set
SET-2
Specifies a character set.
Symbol Set
IBM-437
Specifies a symbol set.
Letter O Style
Disable
Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Zero Character
Normal
Sets the zero to be slashed or unslashed.
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
OFF
Selects whether to print blank pages.
CR Function
CR
Select a carriage return from [CR] or
[CR+LF].
Line Length
80 Column
Specifies the number of characters per line.
Form Length
11.7 inch or
11 inch
*1
Specifies the length of paper.
TOF Position
0.0 inch
Specifies the distance from the top edge of
paper.
Left Margin
0.0 inch
Specifies the distance from the left edge of
paper so that the print starting point shifts to
the right horizontally.
Fit To Letter
Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
(66 lines).
Text Height
Same
Sets the height of a character.
Same: The height stays the same
regardless of CPI.
Diff: The height varies according to CPI.
Private Print
Setup
Verify job option
Disable
Specifies whether to verify the print data
before printing.