Printronix LP654C - Page 126

- 127 -
Item
Factory
default
settings
Description
Job Cancel
Setup
Cancel Key Behavior
Short
Sets the actions when the cancel button is
pressed.
Short: A short press (for 2 seconds or less)
cancels the printing.
Long: A long press for 2 to 5 seconds
cancels the printing.
Off: Pressing the cancel button does not
cancel the printing.
Inquiry Display
On
Sets whether to display a screen to confirm
whether to cancel the printing.
Focus Position
Yes
Sets whether to select [Yes] or [No] as the
default on the job cancel inquiry screen.
Display Timeout
180
Sets the waiting time in seconds before a
button is pressed on the job cancel inquiry
screen. When the waiting time has passed,
the printing will be continued instead of
being canceled.
Near Life
Setup
Drum Near Life Timing
1500
Sets whether to display the number of
copies before the image drum is
approaching the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Fuser Near Life Timing
1500
Sets whether to display the number of
copies before the fuser unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Belt Near Life Timing
1500
Sets whether to display the number of
copies before the belt unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Erase Privacy Data
Execute
Erases the following data set in this
machine.
• Admin password, values set in various
menus
• Various records
• Access control registered to this machine,
user information
NFC Setup
Enable
Enables/Disables the NFC function.
Settings
Reset Settings
Execute
Resets the menu settings changed by the
user to the factory default settings.