Printronix LP654C - Page 127

- 128 -
Item
Factory
default
settings
Description
Save Settings
Execute
Saves the current menu settings. Menu
settings that have been saved previously
will be overwritten.
Restore Settings
Execute
Restores settings to the saved menu
settings.
Change
Password
New Password
-
Input a new admin password.
Verify Password
-
Input the new admin password again to
verify.
*1 Factory default setting values are different according to the country or region.
Print Statistics
Item
Factory
default
settings
Description
Enter Password
****
Input the password required to enter the Print Statistics
menu.
The input range is a 4-digit number.
The factory default setting is "0000".
Usage Report
Enable
Enables/Disables the usage report.
Maintenance Counter
Disable
Sets whether or not to add a maintenance report (non-
resettable counter and non-resettable consumables
replacement times) to [Usage Report].
[Disable]: Prints the resettable counter and resettable
consumable replacement counter in [Usage Report].
[Enable]: In addition to resettable counter and resettable
consumable replacement counter, the maintenance report
(non-resettable counter and non-resettable consumable
replacement counter) is also printed together in [Usage
Report].
Displayed when [Print Statistics] - [Usage Report] is set to
[Enable].
Reset Main Counter
Execute
Resets the main counter.
Displayed when [Print Statistics] - [Usage Report] is set to
[Enable].
Reset Supplies Counter
Execute
Resets the replacement counter of consumables.
Maintenance counter is not reset.
Displayed when [Print Statistics] - [Usage Report] is set to
[Enable] and [Maintenance Counter] is set to [Enable].
Change Password
New Password
****
Sets a new password required to enter the Print Statistics
menu.
The input range is a 4-digit number.
Displayed when [Print Statistics] - [Usage Report] is set to
[Enable].
Verify Password
****
Input the new password required to enter the Print
Statistics menu set in [New Password] again.
Calibration