ProntoNet
What’s New
63
Line 2 Connected The output will be activated when the line 2 is connected. It makes sense only
when the ProntoNet is working in ISDN mode as a DUAL CODEC.
Line 2 Disconnected The output will be activated when the line 2 is disconnected. It makes sense
only when the ProntoNet is working in ISDN mode as a DUAL CODEC.
Decoder 1 Framed The output will be activated when the Decoder 1 is Framed.
Decoder 1 NOT framed The output will be activated when the Decoder 1 is NOT Framed.
Decoder 2 Framed The output will be activated when the Decoder 2 is Framed. It makes sense
only when the ProntoNet is working in ISDN mode as a DUAL CODEC.
Decoder 2 NOT framed The output will be activated when the Decoder 2 is NOT Framed. It makes
sense only when the ProntoNet is working in ISDN mode as a DUAL CODEC.
Backup Active The output will be activated when the ISDN Backup is working.
Backup NOT Active The output will be activated when the ISDN Backup is NOT working.
Alarm Active The output will be activated when one Alarm is activated.
Alarm NOT Active The output will be activated when there are NOT Alarms activated.
Transparent configuration only works with audio algorithms that
support ancillary data and have been previously activated.
WARNING
GPIO has been modified in ProntoNet with serial number 8938/00250 or higher.
Since this production, the GPIO is provided with 7 inputs and 7 outputs.
To Next Page
Loading...
