9.2 Changing the Measured Variable
WARNING!
Incorrect metering due to incorrect measured variable
Possible consequence: Fatal or serious injuries
– The measured variable/measuring range of the sensor is essential for the meas‐
ured variable/measuring range!
–
If the measured variable/measuring range is changed, the sensor must be recali‐
brated
– If the measured variable/measuring range is changed, the set points and limit
values will be changed to the associated starting values!
– If the measured variable/measuring range is changed, the settings in all of the
menus must be checked
general setting
informationen
Identcode:
Vxxxxxxxxxx
D1CBxxxxxxx
Srnr: xxxxxxxxxx
Calib. timer
effective range
0...105 %
A0232_GB
wash timer
measure change
add. functions
PAA
H2O2 (PER)
mA general
pH over mA
Fig. 48: Changing "Standard signal general" measured variable
For possible measured variables see
Ä Table on page 105
.
Measured Variables and Operating Menus for the Standard Signal General
103
To Next Page
Loading...
Need help?
General
