ProMinent DULCOMETER D1Cb - Complete Operating Menu; Description of All Measured Variables

9.7 Complete Operating Menu / Description of All Measured Variables
The complete operating menu allows all control unit parameters to be set. The following
overview shows the settings that can be selected:
Only with
feed forward control
Permanent display 1
Permanent display 2
only with control
(w = setpoint)
Only with limit value-,
or solenoid relay
Only with pumps
%
65
auto.: 30.0°C
Only with
temperature
correction
Only with
mA output
mea. val
65
feed fwd: 70 %
ctrlout: 59 %
w=
0.60 %
calibration
zero p.: 4.0 mA
slope:
0.11 mA
measured value
setting ?
correcting value
setting ?
pumps
setting ?
relay
setting ?
limits
setting ?
mA -output
setting ?
general setting
information
pause / feedfwd:
setting ?
D1C2_mA_017_GB
65 %
0 105
Permanent display
3
Only with control
control
setting ?
Fig. 52: Complete operating menu / Shown with measured variable % and the measuring
range 0%....100%
Measured Variables and Operating Menus for the Standard Signal General
108