ProMinent DULCOMETER D1Cb User Manual

Possible values
Measured vari‐
able
Increment Lower value Upper value Measuring
range*
Flow rate
0.001 m
3
/h 0.000 m
3
/h 10.00 m
3
/h 9.999 m
3
/h
0.1 m
3
/h 0.0 m
3
/h 105.0 m
3
/h 100 m
3
/h
1 m
3
/h 0 m
3
/h 1,050 m
3
/h 1,000 m
3
/h
0.1 gal/h 0.0 gal/h 105.0 gal/h 100 gal/h
1 gal/h 0 gal/h 1050 gal/h 1000 gal/h
Concentration 1 ppm 0 ppm 1050 ppm 1000 ppm
Relative
humidity
0.1 % rel.
humidity
0.0 % rel.
humidity
105.0 % rel.
humidity
100 % rel.
humidity
mA signal 0.01 mA 0.00 mA 21.00 mA 20 mA
0.01 mA 4.00 mA 21.00 mA 20 mA
Turbidity value 1 NTU 0 NTU 10 NTU 10 NTU
1 NTU 0 NTU 105 NTU 100 NTU
1 NTU 0 NTU 2100 NTU 2000 NTU
* Maximum set point that can be set
9.6 Reduced Operating Menu
The reduced operating menu allows the key parameters to be set. The following overview
shows the settings that can be selected:
Measured Variables and Operating Menus for the Standard Signal General
106

ProMinent DULCOMETER D1Cb Specifications

General

Type	Controller
Measurement Range pH	0 - 14 pH
Measurement Range Conductivity	0 - 200 mS/cm
Input Signals	Analog, Digital
Output Signal	0/4 - 20 mA
Protection Class	IP65
Display	LCD
Temperature Compensation	Automatic
Operating Temperature	0 - 50 °C
Measured Variables	pH, Redox, Conductivity
Measurement Range (mg/L)	0.01 - 20 mg/L
Output Signals	Analog
Communication	RS-485, Modbus
Power Supply	100 - 240 V AC