be set in such a way that, for example,
during this period the sample water, which
contains sufficient feed chemical (e.g.
chlorine), for the typical process, flows to
the sensor.
For PID control: The control value issued
following the Pause and the expiry of the
delay period
‘ td ’
consists of the current
P term and (if
‘ Tn> 0 ’
is set) the newly
determined I term.
10.6.2.12 Temperature
In the "Temperature" menu item, the unit
in which the temperature is displayed can
be switched between °C and °F.
Operating Menus Independent of Measured Variables
135
To Next Page
Loading...
