Promise Technology Vess A6120 User Manual

78
Vess A6000 Series NVR Server Promise Technology
emAiL settings
To change Email service settings:
1. Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Make settings changes as required:
Under Service Setting -- Email choose a startup type:
• Automatic –(default)Startsandrunswiththesubsystem.
• Manual –Youstarttheservicewhenyouneedit.
Under Email Server Settings
• SMTPServerIPaddress
• SMTPAuthenticationunder Email Server Settings
TheYesoptionenablesauthentication.
TheNooptiondisables.
• SMTPAuthenticationunder Email Server Settings
Username–RequiredifSMTPauthenticationisenabled.
SMTPAuthenticationPassword–RequiredifSMTPauthenticationisenabled.
Under Email Content Customization
• EmailSender(From)Address–Thesender’snameshownonnoticationmessages.
• EmailSubject–Thesubjectlineofthenoticationmessage.
5. Click the Submit button.
6. Click the Conrm button.
sending A test emAiL messAge
After email settings are completed, you can send a test email.
To send a test email message, complete email settings as described above and check the Send a test email
option box, then click the Submit button. A test email message is sent to the address you specied.

Promise Technology Vess A6120 Specifications

General

Brand	Promise Technology
Model	Vess A6120
Category	Storage
Language	English