Promise Technology Vess A6120 - Removing the Power Supply Unit

2
1
remOving tHe POwer SuPPly unit
To remove a failed power supply, please rst identify the failed power supply .
1. Hold onto the power supply handle while pressing the locking lever towards the power supply handle.
2. Pull to remove the power supply from the chassis.
1. Before replacing the power supply, power off the server, unplug the power
cord, and disconnect all wiring from the power supply.
2. In a redundant system, you do not need to power down the server.
30
Vess A6120 Storage Server Appliance Promise Technology