Promise Technology Vess A6120 - Making Background Activity Settings (CLU)

Making Background Activity Settings (CLU)
1. Main Menu >> Background Activities >> Background Activity Settings
2. Highlight following and press the spacebar to toggle between Enabled and Disabled.
• Media Patrol –Checksthemagneticmediaonphysicaldrives
• Auto Rebuild–Whenenabledandnosparedriveisavailable,the
diskarraybeginstorebuildassoonasyoureplacethefailedphysical
drivewithanunconguredphysicaldriveofequalorgreatersize
3. Highlight following and press the spacebar to toggle through Low, Medium, and High rates:
• Rebuild–Rebuildsdatatoareplacementphysicaldriveinadiskarray
• PDM–Migratesdatafromasuspectphysicaldrive
toareplacementdriveinadiskarray
• Transition–Returnsarevertiblesparedrivetosparestatus
• Synchronization–Checksthedataintegrityondiskarrays
• Initialization–Fullinitializationsetsalldatabitsinthelogical
drivetoaspeciedpattern,suchasallzeros
• Redundancy Check–Checks,reportsandcancorrect
datainconsistenciesinlogicaldrives
4. Press Control-A to save your settings.
The rates are dened as follows:
• Low–Fewerresourcestoactivity,moretodataread/write.
• Medium–Balanceofresourcestoactivityanddataread/write.
• High–Moreresourcestoactivity,fewertodataread/write.
141
Managing with CLUVess A6120 Product Manual