Promise Technology Vess A6120 - Creating a User

70
Vess A6000 Series NVR Server Promise Technology
Creating a uSer
To create a user:
1. Log into WebPAM PROe as the Administrator or a Super User.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Create tab in Management View.
5. Enter a user name in the User Name eld.
6. Enter a password for this user in the New Password and Retype Password elds.
A password is optional. If you do not assign password, tell this user to leave the password eld blank when he/
she logs into to WebPAM PROe.
7. Check the Enabled box to enable this user on this subsystem.
8. Enter a display name in the Display Name eld.
A display name is optional but recommended.
9. Choose a privilege level from the Privilege drop-down menu.
For denitions of each privilege level, see the List of User Privileges below.
10. Click the Submit button.