Promise Technology Vess A6120 - Making Controller Settings (CLU)

Making Controller Settings (CLU)
If your subsystem has two controllers, any settings you make to one controller automatically apply
to the other controller.
To make Controller settings:
1. Main Menu >> Subsystem Management >> Controller Management
2. Highlight the controller you want and press Enter.
3. Highlight Controller Settings and press Enter.
4. Make the following settings as required:
• TypeanaliasintotheAliaseld.
Maximumof48characters.Useletters,numbers,spacebetweenwordsandun-
derscore.Analiasisoptional.
• HighlightCoercionandpressthespacebartotoggle
betweenEnabledandDisabled.
Formoreinformation,see“CapacityCoercion”.
• HighlightCoercion Methodandpressthespacebartotogglethrough:
GB Truncate–Reducesthecapacitytothenearest1GBboundary.
10 GB Truncate –Reducesthecapacitytothenearest10GBboundary.
Grp (group) Rounding –Usesanalgorithmtodeterminetruncation.Resultsinthe
maximumamountofusabledrivecapacity.
Table Rounding –Appliesapredenedtabletodeterminetruncation.
105
Managing with CLUVess A6120 Product Manual