Promise Technology Vess A6120 - About; Array

161
Managing with CLIVess A6120 Product Manual
about
Usage
about
Summary
Displays utility information.
array
Usage
array [-a <action>] [-d <DaId>] [-c <array count>] [-v] array -a add [-s “<list of array
params>”] [-d <DaId>] -p <PdId list> [-c <Ld count>] [-l “<list of Ld params>”] array -a mod -d
<DaId> [-s “<list of array settings>”]
array -a del -d <DaId list>
array -a accept -d <DaId> [-t <condition type>]
array -a addld -d <DaId> [-c <Ld count>] -l “<list of ld settings>”
array -a delld -l <LdId list>
Summary
The array command is the main command for performing advanced conguration and
maintenance tasks on disk arrays.
This command lists, creates, modies, and deletes disk arrays. It also adds and deletes logical
drives.
Note that you cannot mix Hard Disk Drives (HDD) and Solid State Drives (SSD) in the same disk
array.