Promise Technology Vess A6120 - Making Your Own User Settings; Changing Your Own Password

69
Managing with WebPAM PROeVess A6120 Product Manual
mAking your own user settings
To change your own user settings:
1. Log into WebPAM PROe under your own user name.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Settings tab in Management View.
5. Enter or change the display name or mail address.
6. Click the Submit button.
ChAnging your own PAssword
To set or change your own password:
1. Log into WebPAM PROe under your own user name.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Password tab in Management View.
5. Enter the current password in the Old Password eld.
6. If you do not have a password, leave this eld blank.
7. Enter the new password in the New Password eld.
8. Enter the new password in the Retype Password eld.
9. Click the Submit button.