219
TroubleshootingVess A6120 Product Manual
HOw tO reBuild a diSk array
When a physical drive is indicated to be degraded or in critical state, the array that
contains that drive needs to be rebuilt. If you are not using Auto Rebuild (requires a
Spare Drive), then you must rebuild the array manually after the affected drive has been
replaced. Follow the instructions here to rebuild an array.
You will know that a logical drive is critical by looking at the Operational Status in the
Logical Drive Information display.
To begin rebuilding the drive, go to the Local Host menu, the Background Activities
and move the cursor to select Start Rebuild. A new menu appears.
To Next Page
Loading...
