144
Current number of all ACLs: 2 Maximum number of all ACLs: 100
MAC ACL Name Rules Direction Interface(s) VLAN(s)
------------------------------- ----- --------- -------------- ----------
mac1 2 inbound 0/1, 0/2,
0/3,
0/4,
0/5,
0/6,
0/7,
0/8,
0/9,
0/10,
--More-- or (q)uit
(QCT) #show mac access-lists mac1
ACL Name: mac1
Inbound Interface(s): 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7, 0/8, 0/9, 0/10, 0/11, 0/12, 0/13,
0/14,0/15, 0/16, 0/17, 0/18, 0/19, 0/20, 0/21, 0/22, 0/23, 0/24, 0/25, 0/26, 0/27, 0/28, 0/29,
0/30,0/31, 0/32, 0/33, 0/34, 0/35, 0/36, 0/37, 0/38, 0/39, 0/40, 0/41, 0/42, 0/43, 0/44, 0/45,
0/46,0/47, 0/48, 0/49, 0/50, 0/51, 0/52, 0/53, 0/54, 0/55, 0/56, 0/57, 0/58, 0/59, 0/60, 0/61,
0/62, 0/63, 0/64, 0/65, 0/66, 0/67, 0/68
Sequence Number: 1
Action.........................................
deny
Ethertype......................................
ipx
Sequence Number: 2
Action.........................................
permit
Match
All......................................
TRUE
4.3.13.3. Configuring a Time-based ACL
The following example configures an ACL that denies HTTP traffic from 8:00 pm to 12:00 pm and 1:00 pm to
6:00 pm on weekdays and from 8:30 am to 12:30 pm on
weekends.
The ACL affects all hosts connected to ports
that are members of VLAN 100. The ACL permits VLAN 100 members to browse the Internet only during lunch
and after hours.
To configure the switch:
1. Create a time range called work-hours.
(QCT) #config
To Next Page
Loading...
Need help?
General