53
testRW Read/Write Default All
Community-String Group Name IP Address
------------------ ---------------------------- ----------------
private DefaultWrite All
public DefaultRead All
testRO DefaultRead All
testRW DefaultWrite All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
--------------- ------- ------------------- ------- ------ -------- --- ------
172.16.1.100 Trap testRO 1 162
172.16.2.100 Trap testRO 2 162
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
---------------- ------- ----------------- -------- ------ -------- --- -------
System Contact:
System Location:
Snmp v3 configuration example
1. Configure a view and oid-tree included iso.
(QCT) (Config)#snmp-server view testVIEW iso included
2. Configure a group which use testVIEW for read, write and notify(trap).
(QCT) (Config)#snmp-server group testGROUP v3 noauth read testVIEW write testVIEW notify
testVIEW
3. Add a user named testUSER and assign to testGROUP.
(QCT) (Config)#snmp-server user testUSER testGROUP
4. Setup SNMPv3 trap host IP address.
To Next Page
Loading...
Need help?
General