Quanta Cloud Technology QuantaMesh QNOS5 User Manual

78
 Bpduflood
 Auto-edge
 TCN-guard
 Cost
 Edgeport
 STP Version
 STP MST VLAN configuration
 STP MST instance configuration (MST instance ID/port priority/port cost/mode)
 Root guard
 Loop guard
3. Port-channel interface
The following Port-channel attributes must be identical for MLAG Port-channels:
 Port-channel mode
 Link speed
 Duplex mode
 MTU
 Bandwidth
 VLAN configuration
The administrator should also ensure that the following are identical before enabling MLAG:
 FDB entry aging timers
 Static MAC entries.
 ACL configuration
4. Interface Configuration
 PFC configuration
 CoS queue assignments
5. VLAN configuration
 MLAG VLANs must span the MLAG topology and be configured on both MLAG peers. This
means that every MLAG VLAN must connect to two partner Port-channels.
 VLAN termination of a MLAG VLAN on a MLAG peer is not supported.
6. Switch firmware versions
Except during firmware upgrade, the peer switch firmware versions must be identical, as subtle differences
between versions may cause instability.
The administrator must ensure that the above configuration items are configured identically on the MLAG
interfaces on both of the MLAG peers before enabling the MLAG feature. If the configuration settings are

Quanta Cloud Technology QuantaMesh QNOS5 Specifications

General

Brand	Quanta Cloud Technology
Model	QuantaMesh QNOS5
Category	Network Router
Language	English