10-4 CS4 Cutter/Stacker Accessory
• The device may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• Perform only those actions described in this operating manual. Work
going beyond this may only be performed by trained personnel or service
technicians.
• Unauthorized interference with electronic modules or their software can
cause malfunctions.
• Other unauthorized work on or modifications to the device can also
endanger operational safety.
• Always have service work done in a qualified workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.
• The maximum sound pressure level is less than 70 dB(A).
To Next Page
Loading...