12-2 Test functions
Overview
The printer is equipped with different test functions providing information
on:
• the most important configuration parameters
• the fonts available in the printer
• important hardware components and connected peripheral devices
• the print image quality and state of the thermal printhead
• the function of label detection in conjunction with the optical properties
of the label medium
• the label data sent from the computer or read out from the memory card
The test functions are found in the Test menu:
1 Press the menu button.
2 Select Test menu.
3 Switch to the test function level with the down arrow button.
4 Select the desired test function with the right and left arrow buttons.
5 Start the selected test function with the ↵ button.
To Next Page
