Pronto! 482/486/682/863 11-3
Tools and cleaning agents
Cleaning agents
•soft brush
• roller cleaner
• soft cloth
• cotton swabs
• pure alcohol
• special cleaning pen
General cleaning
• Remove dust and paper fuzz in the printing area with a soft brush or
vacuum cleaner.
• Clean outer surfaces with an all-purpose cleaner.
Note: For adjustments and simple installation work, use the accompanying
hexagonal wrench located in the bottom section of the print unit. No other
tools are required for the work described here.
Caution: Abrasive cleaning agents can damage the printer! Do not use
abrasives or solvents to clean the outer surfaces or assemblies.
To Next Page
Loading...