Pronto! 482/486/682/863 5-17
Setup tab
On the “Setup” tab, you can set all the configuration parameters which are
also accessible via the operating panel in the Setup menu. In addition, other
parameters for the Ethernet interface can be set (see below).
The menus and parameters are arranged in a tree structure in the top section
of the tab. The tree structure can be expanded in different ways:
• Click circular symbol in front of the menu symbol once.
The corresponding menu is expanded.
• Double-click menu symbol or menu name.
The corresponding menu is expanded
• Click the Expand All button.
The tree structure is fully expanded.
To change a parameter:
1 Locate parameter in the tree structure.
2 Click parameter name or the symbol next to it.
3 Enter value of the parameter in the input field in the bottom section of the
tab.
4 Click Set.
5 Enter PIN and click OK.
To Next Page
Loading...