4-2 Device types
Standard device
The standard device is used for printing labels or continuous media on rolls
or fanfolded media.
In Tear-Off mode, labels are removed by hand.
The labels can be cut off automatically with the 'cutter' accessory. For details,
see Chapter 9: CU4 Cutter Accessory.
The labels can be wound up with the 'external rewinder' accessory. For
details, see External Rewinder (ER1) on page 8-6 and External Rewinder (ER4)
on page 8-16.
Because there is no internal rewinder, automatic peeling off of the labels from
the carrier medium (Peel-Off mode) and internal rewinding are not possible.
To Next Page
Loading...